VantisVANTIS
Vantis Goliath full-body light bed with an illuminated clamshell array in a dark treatment room
← All equipment

Vantis Goliath

Named for its scale. 41,600 Taiwan Epistar diodes across five wavelengths, 6,500 watts of installed power, and 100–120 mW/cm² of measured irradiance in a full-length lie-flat cabin. Not a red light bed with more lights in it — a different class of machine.

M6REV. 2026.1
Footprint
89.6 IN × 48.6 IN
Height, open
77.6 IN
Weight
838 LB
Electrical
240V / 40A DEDICATED
Diodes
41,600
Irradiance
100–120 MW/CM²
From$55,000

What it does

Plainly, what happens in a session.

  • Flagship, fully loaded configuration. Every option the platform supports is fitted from the factory — there is no higher trim, and nothing on this bed is an upsell after the fact.
  • 41,600 Taiwan Epistar diodes. Imported light source, binned for consistent output, driven at 6,500 watts across the upper and lower arrays.
  • Five wavelengths — 633nm, 660nm, 810nm, 850nm and 940nm — selectable as preset modes or driven together for full-spectrum coverage from skin surface to deep tissue.
  • Measured irradiance of 100–120 mW/cm². Specified as a number at the panel face, not described as powerful.
  • Side cabin design. The reflective side walls close the light field around the body instead of letting it spill into the room, so the output reaching you is the output you paid for.
  • Spacious, full-length lie-flat cabin. 78.7 inches of bed length and 31.5 inches of interior height — you lie in it, not under it, without your shoulders touching either side.
  • Intelligent management system with wireless smart control, customizable pulse frequency modulation, IoT management and commercial external control for room-level or multi-site operation.
  • Colorful ambiance panel and Bluetooth surround sound. The session reads as a treatment, not a tanning appointment.
  • Efficient heat dissipation with powerful active cooling and overheat protection, so session forty of the day runs at the same output as session one.
  • Lunar White as standard, Crystal Black to order, with customizable options and flexible configuration for commercial or residential placement.

Why this one

What the cheaper unit does not do.

41,600 diodes, and the power to actually drive them

Diode count means nothing without current behind it. The M6 carries 6,500 watts of installed power to hold 100–120 mW/cm² at the panel face — most full-body beds on the market run a fraction of that and quote the peak of a single LED instead of the field.

Five wavelengths, not two

633 and 660nm work at the surface. 810, 850 and 940nm carry deeper. Running all five gives you one bed that covers the whole range rather than a two-wavelength unit and a list of things it cannot do.

Pulse frequency modulation, under your control

The management system allows customizable pulse modulation per program, so protocols are set once, saved, and repeated identically by whoever runs the room.

Built to run all day

Efficient heat dissipation, forced-air cooling and overheat protection are engineered for commercial duty. This is a revenue asset that runs back-to-back sessions, not a residential unit asked to work above its class.

Fully loaded, no options ladder

Ambiance panel, surround sound, wireless control, IoT management and the full five-wavelength stack are fitted as standard. The price on the plate is the whole machine.

Full specifications

M6 specification

Product model
M6
Light source
Taiwan Epistar LED, imported
Total diodes
41,600
Wavelengths
633nm + 660nm + 810nm + 850nm + 940nm
Irradiance
100–120 mW/cm²
Total power
6,500 W
Control system
Intelligent management system, commercial external control, customizable pulse frequency modulation, IoT management
Connectivity
Wireless smart control, Bluetooth surround sound
Body color
Lunar White standard; Crystal Black to order
Exterior dimensions, closed
89.6 in L × 48.6 in W × 44.3 in H
Height, lid open
77.6 in
Bed length
78.7 in
Interior height
31.5 in
Weight
838 lb
Cooling
Active forced-air heat dissipation with overheat protection
Occupancy
1
Session length
12–20 min typical
Turnover between sessions
5 min
Application
Commercial and residential
Plumbing
None

Site requirements

Whether it fits in your building, today.

Room size, minimum
13 ft × 10 ft
Ceiling height, minimum
96 in
Clearance, each side
24 in
Clearance above, lid open
77.6 in swing height required
Delivery door width, minimum
36 in
Floor loading
60 lb / sq ft
Electrical circuit
240V / 60Hz, 40A dedicated, hardwired (US service)
Ventilation
Conditioned room air, 65–75°F
Lead time
90–120 days to your door, made to order — varies by unit
Receiving
Site must be able to unload
Plumbing
None required
White glove install
$8,000, required — includes hands-on staff training

Options and configurations

Configure the unit.

White label branding
Your logo and business name applied to the bed, with custom colors and finishes — extra fee
Quoted
Crystal Black body
Factory finish in Crystal Black in place of Lunar White
Quoted
Custom body color
Custom exterior finish to your specification
Quoted
Multi-site IoT management
Fleet-level control and session reporting across locations
Quoted
Replacement cushion set
Additional antimicrobial contour surface set
Quoted

What's included

In the price on the plate.

  • White glove install and hands-on staff training, $8,000 — required on every unit, not optional
  • Fully loaded flagship configuration — ambiance panel, Bluetooth surround sound, wireless smart control and IoT management fitted as standard
  • Full five-wavelength array, 41,600 Epistar diodes, 6,500 W drive
  • Intelligent management system with customizable pulse frequency modulation and commercial external control
  • Freight to the loading dock and inside delivery to the installed room
  • Assembly, leveling, commissioning and output verification on site
  • Full spec, site requirement and operating documentation before purchase

Run your numbers

Vantis Goliath, against your own figures.

Your inputs

Result of your inputs

Monthly revenue from this unit

Based on the numbers you entered. Not a projection, estimate, or representation of results.

Documentation

Download the full spec sheet.

Complete specification, site drawings and electrical requirements for the M6. From $55,000.

Request a quote

Pricing and site requirements in one package.