
Recovery & longevity equipment
The top of this market is a different machine.
Waterless units, rigid chambers, measured output. Built to run eight hours a day in a room that makes money.
The split
The equipment changed. The operating cost changed with it.
The low end of this market has not moved in five years — plastic tubs, plug-in panels, tent chambers. What sits under those prices is labor. Every hour a staff member spends testing water, dosing chemistry, draining a tank or waiting on temperature is an hour that is not a session. The units we carry removed that work from the room.
What the low end requires
- Fill, drain and refill on a schedule
- Water chemistry tested and dosed daily
- Dedicated drain line and floor drainage
- Filtration cycles between users
- Salt solution rebuilt and hauled out
- Staff time booked against turnover, not sessions
- Downtime while the unit returns to temperature
What these units require
- Not required
- Not required
- Not required
- Not required
- Not required
- One wipe-down between sessions
- Set point holds through the day
There is a second effect, and it is the one operators notice. A buyer who walks into a location running this equipment has nothing to price it against. The studio down the street does not have it.
The equipment
Six lines. The flagship and every category below it.

The Immortal
The future of longevity. One bed. Every session. Six technologies in a single 30–45 minute session, run from one tablet.
- Price
- $89,500
- Model
- INF-IDB-IMM-C01
- Session
- 30–45 MIN
- LEDs
- 1,056 PCS

Vantis Apex 2
A two-person hardshell HBOT chamber in aluminum alloy, adjustable from 1.3 to 2.0 ATA, with BIBS masks, a double sofa, climate control and a 43-inch screen inside the pressure vessel.
- Price
- $85,000
- Footprint
- 98.4 IN × 87.8 IN
- Height
- 77.5 IN
- Weight
- 1,655 LB

Vantis Apex 1
A single-occupant hardshell sitting chamber in aluminum alloy, adjustable from 1.3 to 2.0 ATA, with a 2-in-1 oxygen concentrator, in-chamber air conditioning and interior and exterior touchscreens so one person can run a session alone.
- Price
- $52,000
- Footprint
- 79 IN × 35 IN
- Height
- 67 IN
- Weight
- 727 LB

The Locker Room
A compact vertical hardshell hyperbaric chamber in a standing booth footprint, adjustable from 1.1 to 2.0 ATA. A Q390B low-alloy steel pressure vessel with an intelligent 2-in-1 compressor and concentrator, on a floor plan of 55 in by 32 in — small enough for a single room, a clinic suite, or a private residence where the sitting chambers will not fit.
- Price
- $44,000
- Up to 2.0 ATA
- +$10,000
- Footprint
- 55 IN × 32 IN
- Height
- 74 IN

Vantis Goliath
Named for its scale. 41,600 Taiwan Epistar diodes across five wavelengths, 6,500 watts of installed power, and 100–120 mW/cm² of measured irradiance in a full-length lie-flat cabin. Not a red light bed with more lights in it — a different class of machine.
- Footprint
- 89.6 IN × 48.6 IN
- Height, open
- 77.6 IN
- Weight
- 838 LB
- Electrical
- 240V / 40A DEDICATED

Vantis Celsius
Dry Cold Plunge or Dry Float Spa
Dry floatation on a temperature-controlled water membrane. The client lies on a sealed bladder wrapped in a blanket and never touches the water. Ordered in one of two configurations: Cryo, with a 3 HP chiller that holds the membrane at 41°F, or Warm, with a heater that runs up to 140°F. Same bed, same controls, same footprint — the panel control decides the direction.
- Price
- $59,000
- Bed size
- 98 IN × 47 IN × 26 IN
- Weight
- 551 LB BED + 198 LB HOST
- Cryo config
- 41 °F MIN

Vantis Infinity Capsule
Single-occupant dry heat and vibration capsule. The client lies face up with the head outside the shell and the lid enclosing the body from the shoulders down. Ten modalities run from one panel. No water, no steam, no plumbing and no drain.
- Price
- $52,000
- Modalities
- 11
- Session
- 30–45 MIN
- Cabin temp
- 104–140 °F
What you actually get
Delivery and installation
Freight, inside delivery to the room, placement, leveling, commissioning and verification on site. Your staff are trained before we leave.
Warranty and service
Five to seven years structural, two to three years on drive systems, depending on the unit. Serviceable in modules through a front access panel.
Documentation before you buy
Full specification, site requirements, electrical and clearance drawings, and the operating manual — sent before a purchase order, not after.
Run your numbers
Your price, your schedule, your math.
Your inputs
Result of your inputs
Monthly revenue from this unit
—
Based on the numbers you entered. Not a projection, estimate, or representation of results.
Financing
Most of this equipment is financed.
It is bought the way capital equipment is bought — over a term, against the asset itself.
Vantis provides the quote you take to a lender.
Request a quote
Tell us the room. We'll tell you what fits in it.
Pricing, full specifications and site requirements come back in one package. No cart, no checkout, no drip sequence.
